Description

Key Features

• Remote control of 24 cameras via DVIP

• Remote control of 8 cameras via RS-422

• Integrated 5″ touchscreen display

• Panel keys, zoom knob, pan/tilt joystick

• Control camera, switcher, and recorder

• Keyboard brightness slider

Datavideo RMC-300 Overview:
Well suited for EFP as well as houses of worship, education, and corporate productions, the Datavideo universal remote control panel for PTZ and block cameras is a lightweight and portable panel with many features. The rear panel features 8 RJ45 connectors that support RS-422 to control your compatible PTZ cameras (up to 8); an additional RJ45 connector supports the DVIP protocol and allows you to control up to 24 cameras/devices (optional network router required). A 15-pin D-sub female connector outputs tally signals to connected cameras—red indicates On-air and green indicates the next camera source. A USB 2.0 port for firmware updates, along with a power switch and power connector, completes the controller’s rear panel.

The RMC-300A features an integrated 5″ touchscreen for setup, control, and data input using a keyboard mode. The panel also features a transition scroll wheel and buttons for dedicated functions such as shutter, iris, focus, and gain for camera control, as well as switcher functions such as cut and mix/wipe. Standard camera tools, including a zoom knob and a pan/tilt joystick, are built into the panel. You can create up to 7 presets for each connected camera and easily trigger them via the built-in programmable buttons.

The panel buttons are color illuminated and a slider control allows you to adjust the brightness. The unit includes a 12 VDC power adapter.

General

• Remote control via RS-422 or DVIP port

• Control up to 24 Datavideo PTZ/block cameras with 7 presets for each camera

• RGB keyboard for easy identification of functions

• User-friendly interface on the 5″ touchscreen for easy camera setup

• Zoom knob and pan/tilt joystick for adjusting zoom and lens position

• Easy to use and highly precise

• Control camera, switcher, and recorder remotely

• Firmware upgradable via USB 2.0 port

Touchscreen Control
The 5″ touchscreen allows selection between camera, switcher, recorder, and control panel tabs for precise adjustment of settings and functions

PTZ Control
Control PTZ speed for zoom, pan, and tilt, as well as camera position, and configure up to 7 preset positions for each camera